Connection To A Tv - Toshiba D-R400 Owner's Manual

Make one of the following connections, depending on the capabilities of your display device.
analog audio
TV
rear of your TV
this unit
VIDEO VIDEO
IN OUT
L L
HDMI OUT
R R
IN
COAXIAL
AUDIO IN DIGITAL AUDIO OUTPUT
S-VIDEO AUDIO OUT
(L1)
PCM / BITSTREAM
AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV's original
remote control that selects an external input channel until the DVD recorder's opening picture appears. Check your
TV owner's manual for details.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• When "Progressive Scan" is set to "ON", no video signal will be output from the VIDEO OUT or S-VIDEO OUT
jack.
To set progressive scan mode, refer to page 91
• This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the
traditional output system. To utilize this feature, you must set "Progressive Scan" to "ON".
20 20 EN EN
E7E7AUD_EN.indb 20 E7E7AUD_EN.indb 20

CONNECTION TO A TV

Method 1
standard picture
VIDEO
AUDIO IN
L R
RCA
and
audio cable
VIDEO
VIDEO
OUT
OUT
L
R
AUDIO OUT
AUDIO OUT
VIDEO OUT
Method 2
good picture
S-VIDEO IN
IN
RCA
video cable
S-video cable
or
L
R
S-VIDEO OUT
Method 3
better picture
COMPONENT
VIDEO IN
Y
P /C
B B
P /C
R R
component
or
video cable
Y
OUT
P /C
B B
S-VIDEO
P R /C R
COMPONENT
VIDEO OUT
COMPONENT
VIDEO OUTPUT
2007/01/29 19:03:48 2007/01/29 19:03:48