Toshiba D-R400 Owner's Manual page 91

Video (cont'd)
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [ENTER].
General Setting
Playback
Display
Video
Progressive
Recording
ON
Clock
OFF
DivX
HDMI
Reset All
2) Use [{ / B] to select "Yes", then press [ENTER].
General Setting
Playback
Activating progressive scan:
Display
Check your TV has progressive scan
Video
Progressive
and connect with component video cable.
Rcording
ON
Clock
OFF
DivX
NOTE :
HDMI
If there is no picture or picture is
Reset All
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the HDMI or
component video cable (commercially available) to
connect this unit to the TV. (Refer to "Method 3" on
page 20.) If not, use the RCA video cable and set the
progressive scan to "OFF" or press and hold [SETUP]
for more than 3 seconds during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
E7E7AUD_EN.indb 91 E7E7AUD_EN.indb 91
GENERAL SETTING
Progressive
TV Aspect
Select Video
Progressive
TV Aspect
Select Video
"Yes",
Yes No
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press
[ENTER].
General Setting
Playback
Display Progressive
Video TV Aspect
TV Aspect
Recording Select Video
4:3 Letter Box
Clock
4:3 Pan & Scan
DivX
16:9 Wide
HDMI
Reset All
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
EN EN 91 91
2007/01/29 19:04:37 2007/01/29 19:04:37