Viper AS710R User Manual page 7

This machine is intended for commercial use. It is constructed for use in an indoor environment
and is not intended for any other use. Use only with recommended accessories.
All operators shall read, understand and exercise the following safety precautions:
1) DO NOT OPERATE MACHINE:
Unless trained and authorized.

Unless you have read and understand the user manual.

In flammable or explosive areas.

If not in proper operating condition.

In outdoor areas.

2) BEFORE OPERATING MACHINE:
Make sure all safety devices are in place and operate properly.

3) WHEN USING MACHINE:
Go slow on inclines and slippery surfaces.

Follow all safety guidelines.

Be very careful when using the machine in reverse.

Report and repair any damage to machine prior to operating it.

4) BEFORE LEAVING OR SERVICING MACHINE:
Never park the machine on a slope.

Turn machine off.

5) WHEN SERVICING MACHINE:
Read user manual thoroughly prior to operating or servicing this machine.

Use manufacturer supplied or approved replacement parts.

Use approved jack or hoist to safely elevate the machine.

Disconnect batteries prior to working on machine.

Wear gloves when handling batteries or battery cables.

Avoid moving parts. Do not wear loose fitting clothing while servicing machine.

6）SAFETY DEVICES
Emergency-stop button(A15)

When the Emergency-stop button is pressed, the machine will come to a sudden
stop, and all machine functions and displays will stop. Twist the button slightly to
reset it.
Seat safety button (inside A1).

If the operator leaves the seat during operation, the drive motor will shut off in 0.5
seconds. The LED screen displays STOP.
USER MANUAL
SAFETY PRECAUTIONS
5