Ec Declaration Of Conformity - Proxxon MF 70 Manual

Every device is dirtied by dust when working. Cleaning is
therefore essential. To ensure a long service life, however,
the machine should be cleaned with a soft cloth or brush
after each use.
Mild soap or other suitable cleaning agent may be used in
this context. Solvents or cleaning agents containing alcohol
(e.g. petrol, cleaning alcohols, etc.) should be avoided, since
these can attack plastic casings.
The apertures required for cooling the motor must always be
kept free of dust and dirt.
Accessories
For more detailed information on accessories, please
request our device catalogue from the address specified on
the last page in the warranty information.
Please note in general:
Proxxon bits and cutters have been designed to work with
our machines, which makes them optimal for their use.
We will not assume any liability whatsoever for the safe and
proper function of our devices when using third-party bits and
cutters!
Service note
Please note: The mains power input may only be replaced by
our Proxxon Service Department or a qualified specialist!
Disposal
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding
municipal facilities.
Note:

EC Declaration of Conformity

Name and address:
Product designation:
Article No.:
In sole responsibility, we declare that this product con-
forms to the following directives and normative docu-
ments:
EU EMC Directive
EU Machinery Directive 2006/42/EC
Date: 10.05.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
MF 70
27110
2014/30/EC
DIN EN 55014-1 / 09.2016
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03.2014
DIN EN 62841-1 / 07.2016
- 9 -