Getting Started - Alpine Advanced Navi Station X903D Quick Reference Manual

Getting Started

Location of Controls
The screen design used in the Owner's Manual may differ from the actual screen.
For X903D
For X803D-U/INE-W720D
RESET switch
The system of this unit is reset.
MENU/ (Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn
the power off.
(NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to
change to Go Home route screen. (If Home is not set
yet, it will change to the Home setting screen.)
For details of navigation operations, refer to "Navigation
System OM" in the CD-ROM.
/ or / (UP/DOWN) button
Press to adjust the volume.
(PHONE) button (X903D only)
Recalls the Phone Menu screen.
Press to start a conversation when a call is incoming.
4
-EN
Owner's manual Getting Started
or VOICE button
Depending on the connected smartphone, press to
recall Siri function or voice recognition mode.
/ button
Press to seek up/down a station in radio mode or up/
down a track, chapter, etc., in other audio/visual
sources.
(AUDIO)/(Favourite) button
Displays the Audio/Visual screen. If the Audio/Visual
screen is already displayed, changes the source.
Press and hold for at least 2 seconds to recall the
Favourite screen.
(MUTE) button
Press to activate/deactivate the mute mode.
Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 metres.
Microphone (X803D-U/INE-W720D only)
Used for Hands-free or Voice Control modes.