Toro ProPass 200 Operator's Manual page 37

Figure 51
1. Lift cylinder locking pin
12. Store the cylinders in the storage clips. Engage
the hydraulic lift lock lever on the vehicle to
prevent accidental extension of the lift cylinders.
13. Raise the rear jack stands until enough
clearance is attained to drive the vehicle away
from the machine.
14. Walk around the machine. Ensure that it is clear
of the work vehicle's frame and secured within
each of the 4 storage stand legs.
15. With the work vehicle in neutral gear, engage
the parking brake and start the engine.
16. Disengage the parking brake and slowly drive
the work vehicle forward, away from the machine
truck-mount on the storage stand.
g013778
37