Toro ProPass 200 Operator's Manual page 27

Button
Turning On the Handheld Remote
Press the O /O button on the remote and wait
N FF
for the it to find the base. Ensure that there are no
buttons being pressed on the handheld remote while
it is performing the startup routine.
Manual Override
Should the remote ever be lost, damaged or fail, the
machine functions and operation are still possible in
order to complete tasks or continue work.
The override access is on the driver side of the
hydraulic system (Figure
Name Primary Function
F I Increases the floor speed.
LOOR NC
P 1 Three separate preset values may be stored for both floor and option speeds.
RESET
P 2
RESET
P 3
RESET
Used in conjunction with the P
S
TORE
memory.
O S Provides functional control of the rear option including on/off and displaying
PTION TART
the option speed.
O S Stops the option.
PTION TOP
O D Decreases the option speed.
PTION EC
O I Increases the option speed.
PTION NC
A S Stops both floor and option.
LL TOP
43).
RESET
1. Floor speed
•
To adjust the floor speed
clockwise. Maximum floor speed is used in the
Color-Coded Operating System so this adjustment
can be made while no hydraulic flow is present.
This is most relevant when you have a hopper full
of sand.
27
button to store or establish a preset
Figure 43
2. Spinner speed
(Figure 44), turn the knob
g030467