6. Follow Sensys's prompts, open the network settings of your internet device (smart-
phone, PC, Tablet...) and search for available Wi-Fi networks. Select the Remote GW
Thermo network. Now go to paragraph 5.2.
CH Settings
DHW Settings
Connectivity Settings
Screen Settings
5.1.2 Configuration with the AP button
1. Hold down the AP button (for at least 5 seconds) until the WEB led
flashes green. After a maximum of 40 seconds, the gateway creates a
new WiFi network that remains active for 10 minutes, after which you will
need to repeat the procedure.
2. Open the network settings of your internet device (smartphone, PC, Tab-
let...) and select the Remote Gw Thermo network.
Now go to paragraph 5.2.
42 /GB
ON/OFF Wi-Fi Network
Network configuration via AP
Serial Number
Factory data reset
Signal Level
(as alternative to par. 5.1.1)