Ariston Sensys Net Installation And User Manual page 36

Type 2
Activation of RD alone in a basic heating system with
System where only Teleassistance is activated for the Service Centre is activated
without installing the Ariston Sensys accessory.
Actions required (Fig. 4):
In this configuration, any ON/OFF temperature regulation accessory already present in
the house can be left installed. Therefore it is only necessary to:
- Install the gateway, connecting it to the heating product via the BridgeNet BUS
connection.
TA
36 /GB
Fig. 3
THERMOSTAT
.
(fig.3)
GATEWAY
BUS TA
Fig. 4
THERMOSTAT