Aiwa XR-MSK3 Service Manual page 33

Pin No. Pin Name
69 Y OUT
70 AVDD DAC
71 AGND DAC
72 R REF
73 V REF
74 AVDD DAC
75 C OUT
76 AGND DAC
77-79 CLK SEL0-2
80 VSS
81 CLK SEL3
82 VDD3
83, 84 CLK SEL4, 5
85 AGND PLL
86 DA XCK
87 AVDD PLL
88 DA EMP
PGIO5, O6
89, 90
91 PGIO0
92 PGIO8
93 VSYNC/CSYNC
94 AVDD PLL
95 NC
96 NC
97 NC
98 AGND PLL
99 VSS
100 NC
101 HSYNC
102 VDD3
103 VCK OUT
104 VSS
105 GCK
106 VCK IN
107 GCK OUT
108 DA LRCK
109 VDD MAX OUT
110 DA DATA
111 DA BCK
112 HD OUT
113 HRDY
I/O
O
Video signal "Y" OUT.
—
Analog power supply (DAC) 3.3V.
— Analog ground.
I Reference resistor input.
I Voltage reference input.
— Analog power supply (DAC) 3.3V.
O Video signal "C"out.
— Analog ground.
I Clock selection input.
— Ground.
I Clock selection input.
— Power supply 3.3V.
I Clock selection input.
— Analog ground.
I DA XCK (16.933MHz) input.
— Analog power supply 3.3V.
O DAC-emphasis output.
I/O
I/O Programmable I/O.
I/O
O VSYNC/CSYNC output.
— Analog power supply (PLL) 3.3V.
— Not connected.
— Not connected.
— Not connected.
— Analog ground.
— Ground.
— Not connected.
O HSYNC output.
— Power supply 3.3V.
O VCK out.
— Ground.
I Global clock signal input. (42.3MHz)
I Video clock signal input. (27.0MHz)
O Global clock signal output. (27.0MHz)
O DAC-LRCK output.
— Power supply (VDD MAX) : 5.0V.
O DAC-PCM data output.
O DAC-BIT clock output.
O Micon interface. (Data out)
O Micon interface. (Host ready)
Description
-33-