1. Manuals
  2. Brands
  3. Hallde Manuals
  4. Commercial Food Equipment
  5. RG-50S
  6. User instructions

Hallde RG-50S User Instructions

Vegetable preparation machine
Hide thumbs Also See for RG-50S:
1
2
3
4
5
6
7

Advertisement

Table of Contents

USer inStrUctionS
vegetable preparation machine rg-50S
made in Sweden. exclusively distributed and serviced in australa by roband australia pty ltd.
all standard hällde products are designed to run at 220-240v per phase, 50hz.
all specifications are nominal only. all information contained in this instruction is subject to change without notice
due to constant research and development. ab hällde maskiner reserves the right to make changes to machines,
accessories and cutting tools.
Roband Australia Pty Ltd
all care has been taken to ensure correct information at time of printing. ab hällde maskiner
1 inman road,
accepts no responsibility for printing errors.
cromer, nSW 2099
australia
tel: +61 2 9971 1788
Fax: +61 2 9971 1336
www.roband.com.au
robandaustralia
0319
email: sales@roband.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-50S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hallde RG-50S

Summary of Contents for Hallde RG-50S

  • Page 1 USer inStrUctionS vegetable preparation machine rg-50S made in Sweden. exclusively distributed and serviced in australa by roband australia pty ltd. all standard hällde products are designed to run at 220-240v per phase, 50hz. all specifications are nominal only. all information contained in this instruction is subject to change without notice due to constant research and development.

  • Page 2: Installation

    To eliminate the risk of damage to the motor, Open” is at 5 o’clock in relation to the outlet the details on the data plate on the back of the RG-50S is fitted with thermal motor of the machine base and turn the vegetable the machine base.

  • Page 3: Technical Specification

    VEGETABLE PREPARATION it clockwise. POTATOES ATTACHMENT TECHNICAL SPECIFICATION HALLDE RG - 50S CAPACITY AND VOLUME: Processes up to 2 kg. per minute depending on the type of cutting tool and foods. Volume of the feeder: * CUTTING TOOL 0.9 litres. Diameter of the feed tube: 53 mm.
  • Page 4 The QR-code above leeds you to our Cutting in good condition. accordance with the list on page 42-45. Tool Guide at hallde.com. The guide shows DURING USE: which cutting tool is recommended to use TECHNICAL SPECIFICATION...
  • Page 5 RG - 200 AND RG - 250 RG - 200 AND RG - 250 Decoring device Decoring device Cutting tool Slicer Ejector plate Dicing grid KNIFE HOUSE Ejector plate KNIFE HOUSE Dicing combinations available at hallde.com HALLDE • User Instructions...
  • Page 6 Vegetable Preparation Machine RG-50S Vegetable Preparation Machine RG-50S and RG-50 HALLDE • User Instructions...

  • Page 7: Declaration Of Conformity

    SUPPLIER P.O. Box 1165, SE-164 26 KISTA, Sweden ADDRESS DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCTS: RG-50S, RG-50, VPU/FP-50, RG-100, VPU/FP-100, FP-150, RG-200, MODEL NAME VPU/FP-200, RG-250, VPU/FP-250, RG-7, RG-350, VPU/FP-350, RG-400, VPU/FP-400 RG-400i, VPU-400i, FP-400i. SERIAL NUMBER...

This manual is also suitable for:

Rg-50

Table of Contents