For Your Guidance; Questions And Answers - Toshiba 32ZT29B Owner's Manual

Q
uestions
If you experience what seem like problems operating your TV, we
recommend you read through the simple checks below and on pages 39 and 40 before calling the helpline.
Q
Why is there no sound or picture?
A Check that the mains switch is on and check all the
connections. Press the Standby button
remote control to make sure that the TV is not in Standby
mode. Press a number button on the remote control to
cancel any Timer off setting.
Q
Why am I not receiving a clear digital picture?
A Check the signal level.
Press the DTV MENU button then with the Q or P
button highlight Setup and press SELECT. Then highlight
Manual Tune and press SELECT.
As long as the signal level bar is green the signal is good.
If the bar is yellow/red the signal is poor and you should
contact your aerial technician.
Why does the picture and sound breakup 'mosaic'
Q
or the image freeze?
A
Check the signal level in
Check the aerial. You may have to contact your
aerial technician to re-position the aerial.
Check the connections and cables. The cables may be
defective and require replacement.
Q
Why can't I see the DTV MAIN MENU
A
You are in analogue mode. Press the ATV/DTV
button.
Q
Why can't the digital text service be seen?
A
The digital programme you are on is not broadcasting
digital text. Try another digital programme.
Q
Why does the LOCKED CHANNEL display come up?
A You have chosen to Lock the programme. See the
Parental control pages.
Q
Why is the video picture good but there is no sound?
A Check the Scart lead connection.

FOR YOUR GUIDANCE

A
and
i on the
Manual Tune.
nswers
...
Q
There IS a picture, but why is there little or no colour?
A
When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
television is factory set to AUTO in the
automatically display the best colour system.
To check that you have the best colour...
From the
1
Set up
Colour
Auto tuning
Manual tuning
Programme sorting
Teletext
EXIT
With the S or R button, choose between AUTO,
2
PAL, SECAM, NTSC 4. 43 or 3. 58.
Q
A
Blue screen
no signal is being received, the TV will turn off the
sound and switch the TV screen to blue. After 20 minutes
the TV will switch to Standby mode.
Q
Why is the video recorder/DVD picture in black and white?
A
Check that the correct
AV connections.
Q
Why can't I see the video tape/DVD I am playing?
A Make sure you have connected the VCR/DVD player
using a Scart lead and see page 37 for
connections.
Q
Can anything else cause a poor picture?
A Yes. You must ensure that the aerial lead is
connected directly to the TV and not the VCR.
38
Set up
Set up menu select Colour.
: To exit
Why has the screen turned blue?
in the Feature menu is ON. When
has been chosen. See
input
menu to
AUTO