Analogue Auto And Manual Tune; Auto Tune - Analogue; Manual Tune - Analogue - Toshiba 32ZT29B Owner's Manual

Auto tuning searches for all the available analogue stations.
As an alternative to auto
Until you tune-in analogue channels, when you
press the ATV/DTV button you will see the
Auto Tuning prompt. You will need to run
to be able to watch analogue programmes whilst
recording digital TV.
Auto tuning
You have selected analogue
TV for the first time.
Press SELECT to start the
tuning for Analogue TV
channels.
This will take 2 to 3
minutes
Press the SELECT button on the remote control to
1
begin the search for available analogue stations.
will flash and the bullet will move
x x x x x x x x x x
along the line as the search progresses.
Auto tuning
Searching
Channel : 21
Station :
EXIT : To exit
SETTING UP
analogue auto tune
and manual tune
tune, you can tune-in your analogue stations manually.
tuning-in your
Auto Tune
analogue stations
When the search is complete the TV will
2
automatically return to programme position 1.
If the picture is not clear you can change the
3
station order, using
page 14.
analogue
Several functions are included in the manual tuning
menu and are covered on the next few pages.
These options will appear as
you move across the screen:
Programme System
Programme:
System:
Search:
Programme skip:
Channel:
Manual fine tuning:
Station:
Press the TV MENU button to display the
1
analogue menu bar. Use the S or R button to
highlight
Now with the P or Q button, highlight
2
tuning in the menu options and the R button to
select.
Set up
Colour
Auto tuning
Manual tuning
Programme sorting
Teletext
EXIT
11
sorting, on
Programme
manual tuning
Search Programme skip/ Manual fine
Channel
tuning
The number to be pressed on the remote control.
Specific to certain areas. See page 12.
Search up and down for a signal.
* means nothing has been stored or the facility
to skip the programme is ON. See page 13.
The channel number on which a station is being
broadcast.
Only used if you experience interference/weak signal.
See page 14.
Station identification. You can use the P and Q
or S and R buttons to enter up to seven characters.
Set up from the top bar.
: To exit
Continued on the next page...
Station
Manual
AUTO