Adjusting Your Electric Bike; Adjusting Your Seat Height; Adjusting Your Saddle Position - Igo Elite II User Manual

Adjusting your Ergofit electric bike

Adjusting your seat height

Your seat height should be adjusted properly to ensure you get the most
comfortable ride possible. The seat height is properly adjusted when your
knee has a slight bend when sitting on the saddle with your foot on the
pedal at its lowest position (figure 16.1). The seat height can be adjusted by
loosening the quick release lever on the seat tube clamp figure 16.2. Make
sure to retighten after adjustment .
fig. 16.1
ATTENTION! Ensure that the safety marks for max. height written on the
seat post are not visible when retightening the quick release lever.
ATTENTION! If you can put your feet flat on the ground while seated,
your seat height is too low.

Adjusting your saddle position

You can tilt the saddle to change the seating angle, as well as slide it
backward or forward (figure 16.3). To adjust the saddle, loosen the nut
located on the underside of the saddle with an allen key (figure 16.4). You will
be able to move the saddle around to suit your preferred riding style. When
you are done adjusting, make sure to retighten the nut.
fig. 16.3
fig. 16.2
fig. 16.4
16