Gears; Tire Pressure; Front Cargo Rack - Igo Elite II User Manual

Gears

Your electric bike comes equipped with a Shimano Altus 8-speed drivetrain.
The trigger shifter mounted to your right handle will allow you
to change gears. It is important that you only change gears while
pedaling as the chain must be in motion to properly shift gears.
To shift up a gear, pull the trigger closest to your index finger.
To shift down a gear, push the trigger closest to your thumb.

Tire Pressure

The tire pressure will affect the range and comfort of your bike.
iGO recommends that you always keep your tires at the designated pressure
to ensure the best ride. The recommended tire pressure is listed on the
sidewall of the tire. The tire pressure is measure in P.S.I. (Pounds / Square Inch).
Make sure to use a tire pressure gauge when pumping
your tires to fill the proper amount of air.
ATTENTION! Riding on deflated / soft tires will
severely reduce the range of the battery.
Front Cargo Rack assembly
Your bike comes equipped with a front cargo rack.
It can be used to transport items or parcels up to 9 kg ( 19.8 lbs ) in weight.
*An instructional video for mounting the front cargo rack & light can be found
at : http://www.igoelectric.com/buildmyelite2
Identify the 4 front rack bolts and
4 washers. Slide a washer onto
each bolt and using the 4mm allen
key insert bolt #1 into position,
figure 19.1 and slightly tighten
bolt . Following the pattern in
figure 19.1 attach all 4 bolts Do not
tighten until all 4 bolts are in place.
Making sure front rack is
centered tighten all 4 bolts.
19