Charging The Battery - Igo Elite II User Manual

Table of Contents

Advertisement

Battery Instructions

Charging the Battery

The battery can be charged both on and off of the bike.
Please identify your charging port (figure 14.1).
First plug the chargers male plug into the battery, then plug the chargers
110 volt plug into your wall outlet. ( Do not use an extension for 110 volt )
The indicator on the charger will light green for a few seconds and
if a charge is necessary, the LED will turn red. The battery is fully
charged when the battery indicator LED becomes green .
Unplug the charger from the wall first, and then from the battery.
If the battery is not mounted to the bike you can always
check the battery level as seen in figure 14.2.
fig. 14.1
ATTENTION! Unplug the charger when the battery is
fully charged, or when charger is not in use.
ATTENTION! The battery will sustain permanent damage if not used
for a long period of time (ex: Winter storage). SEE PAGE 13
Please make sure to charge the battery once a month during this
ATTENTION! Please recycle your battery at an
authorized recycling company in your area
ATTENTION! Make sure to only charge the battery in a dry,
well ventilated area.
ATTENTION! When the battery is completely depleted you must
charge it immediately. If the cells are left depleted for a long
period of time, they may become irreparably damaged.
14
fig. 14.2
time .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents