Settings Menu - Igo Elite II User Manual

Settings Menu

Hold down both the 'PLUS' & 'MINUS' button for 2
seconds to enter the Settings Menu.
The Settings Menu will allow you to change certain
parameters of your electric bike.
Once in the Settings menu the word mode display will begin
to flash, pressing the 'Mode' button will allow you to cycle
through the different settings. The 'PLUS' and 'MINUS' buttons
will allow you to change the values of those settings.
Holding the 'MODE' button again for 2 seconds will save the settings
and exit the Settings Menu.
Set 1: Reseting the Trip Odometer
The flashing 'tC' represents 'trip distance clearance' . Use the 'PLUS'
& MINUS' buttons to toggle between 'y' to clear the current value
and 'n' (the default option) to keep current recorded distance. Press
'MODE' to save this setting and proceed to next setting option.
Set 2: Backlight Contrast Setting
The flashing 'bL' represents 'backlight contrast settings' . Use
the 'PLUS' & MINUS' buttons to toggle between values 1,
2, & 3 (1 dimmest light, 3 brightest light). Press 'MODE' to
save this setting and proceed to next setting option
Set 3: Choosing km/h or mph
The flashing 'U' represents 'units' . Depending on your
location, you will want to have the information on the
screen displayed in the proper unit. the values are:
1 = mph
2 = km/h (default)
Pressing the 'PLUS' or 'MINUS' buttons while in this mode
will allow you to switch between values 1 and 2 to have
the information displayed in kilometers or miles.
Press 'MODE' to save this setting and return to the first option
or hold 'MODE' for 2 seconds to exit the settings menu
8