Disconnecting And Removing The Battery - Igo Elite II User Manual

Table of Contents

Advertisement

Disconnecting & Removing the Battery
On the top-right side of your battery is the battery lock.
This lets you unlock the battery pack of the bike.
To Lock: Insert the bottom of the battery into its receptacle on an angle as
shown while pushing the top of the battery into the lock until an audible
click is heard. (The key is not required to lock the battery onto the bike.)
To Unlock: Insert the key into the lock and turn approximately
1/4 turn clockwise until the battery unclips and is released from
the receptacle. The battery is now free to be removed from the
bike. The key can then also be removed from the lock.
ATTENTION! Take care to position your hands away from
joining edges to avoid pinching your fingers.
Important Battery storage information
When not using your bike for periods exceeding
1) Before storage make sure that the battery is not charged more than
You cannot periodically charge a fully charged battery.
2) Once every month you must attach the supplied battery charger
and charge for a period of no more than 15 minutes.
3) Continue this procedure once a month until more frequent use.
This process will make sure that your battery does not stay at a
specific rate of charge for long periods of time.
ATTENTION! Remove the key after installing the battery to
prevent any form of loss or theft to the key or the battery.
one month please charge as follows:
50% so that it will accept a periodic charge.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents