Settings Menu - Igo eXtreme User Manual

DISPLAY & FUNCTIONS

SETTINGS MENU

Hold down both the 'PLUS' & 'MINUS' button for 2 seconds to enter the Settings Menu.
The Settings Menu will allow you to change certain features of your ebike.
Once in the Settings menu the word mode display will begin to flash, pressing the
'Mode' button will allow you to cycle through the different settings. The 'PLUS'
and 'MINUS' buttons will allow you to change the values of those settings.
Holding the 'MODE' button again for 2 seconds will save the settings
and exit the Settings Menu.
Set 1: Reseting the Trip Odometer
The flashing 'tC' represents 'trip distance clearance' . Use the 'PLUS' & MINUS' buttons to
toggle between 'y' to clear the current value and 'n' (the default option) to keep current
recorded distance. Press 'MODE' to save this setting and proceed to next setting option.
Set 2: Backlight Contrast Setting
The flashing 'bL' represents 'backlight contrast settings' . Use the 'PLUS' & MINUS'
buttons to toggle between values 1, 2, & 3 (1 dimmest light, 3 brightest light).
Press 'MODE' to save this setting and proceed to next setting option.
Set 3: Choosing km/h or mph
The flashing 'U' represents 'units' . Depending on your location, you will want to
have the information on the screen displayed in the proper unit. the values are:
1 = mph
2 = km/h (default)
Pressing the 'PLUS' or 'MINUS' buttons while in this mode will allow you to switch
between values 1 and 2 to have the information displayed in kilometers or miles.
Press 'MODE' to save this setting and return to the first option or
hold 'MODE' for 2 seconds to exit the settings menu.
10
w w w . i G O e l e c t r i c . c o m