Location Of Controls - Albrecht Aircontrol M9 Manual

ALBRECHT AIRCONTROL M9

LOCATION OF CONTROLS

1 .Antenna
2. On/off volume control
3. Squelch control
4. Tuning control and tuning scale
5. Band switch
6. DC adapter jack
7. Earphone socket
8. Battery case
9. Speaker
How to operate Your Aircontrol M 9
Remove battery case of the cabinet, and insert 4 penlight 1.5V, batteries into the
battery case. Be sure the battery position is correct by referring to the negative
on spring connector. Otherwise, circuit components may be damaged.
NOTE: WEAK OR DEAD BATTERIES MAY LEAK AND CORRODE THE SET:
ALWAYS REMOVE BATTERIES WHEN THE SET WILL NOT BE USED FOR A
LONG PERIOD OF TIME.
POWER ON/OFF SWITCH (2)
Put the power ON/OFF Switch to ON position.
TELESCOPIC ANTENNA (1)
Extend the telescopic antenna to its full length that gives the clearest sound.
When listening to nearby or strong stations, it is often desirable to shorten the
antenna to avoid distorted sound.
TUNING (4)
Your radio can be slide on to CB , TV1-FM or PB-WB-AIR bands by the Band
Selector (5). Just turn the Tuning Control Knob (4) to your favorite station and
adjust Volume Control Knob for proper volume. Use the frequency scale (4)
PB-WB-AIR RECEPTION
Extend the telescopic antenna to its full length that gives the clearest sound.
Slide Band Selector to "PB-WB-AIR" position and tune to any desired station.
TV 1- FM RECEPTION
Extend the telescopic antenna to its full length that gives the clearest sound.
Slide Band Selector to "TV1-FM" position and tune to any desired station.