Advertisement
GARDENLINE GL46 Petrol Lawnmower
14) Ref:- Manual Fig. 09, 10, 11
Remove the lawnmower from the box.
Hold the Grass Flap against the rear of the mower (1).
Hold one side of the Grass Flap, and with your other hand, use your thumb to press the
middle leg of the Grass Box Spring out, so it locates into the small square hole on the
back of the mower frame (2). Push the middle leg of the Grass Flap Spring fully into
the square hole so the Grass Flap sits neatly against the Rear Frame of the mower (3).
1
15) Ref:- User Manual Fig. 11
Take the long Grass Flap Bar and pass it through the hole on the left side of the Grass
Box Flap (1). Look underneath the Grass Flap to ensure the bar passes through the
Grass Flap Spring (2).
Tip: When the bar reaches the right hand side, the Grass Flap Spring will cause
the bar to be pulled forwards, out of position. To locate the bar into the hole on
the right hand side of the Grass Flap, press the left end of the bar forwards (a),
then push it in (b). Looking at the hole from the right hand side whilst doing this,
will help to see the position of the bar and aid its location (3).
1
2
Underside of Grass Flap
8
2
3
3
b
a
After Sales Support +44 (0) 808 169 8390
GL46_010319
Advertisement
