Installation - AEG MCC4061E User Manual

62 62 www.aeg.com www.aeg.com

9. INSTALLATION

The microwave can be fitted in position A,
B or C:
A
9.1 Installing the appliance
Conventional
oven
Chimney Chimney
Cable clip
C
A
Position
Cable clip
B
A
B
C
Measurements in (mm)
1. Remove all packaging and check
carefully for any signs of damage.
2. If the microwave is fitted in position C,
ensure that the minimum air gaps are
maintained as shown in the diagram.
B
3. Secure four cupboard retention blocks
in position using the setting template
(TMAPTA004URR0).
4. Fit the appliance into the kitchen
cupboard, lift over the bottom/front
blocks then push slowly, and without
65 mm
force, until the front frame of the oven
C
seals against the front opening of the
cupboard.
5. Ensure the appliance is stable and not
leaning.
6. Fix the oven in position with the screws
provided. The fixing points are located
within the louvre areas at the top and
bottom of the oven (see diagram, item
1 on page 41).
7. Fit the frame fastener caps to the four
fixing positions (2 spare caps are
provided).
8. It is important to ensure that the
installation of this product conforms to
the instructions in this operation manual
and the conventional oven or hob
manufacturer's installation instructions.
Niche size
Chimney
W D H
562 x 550 x 450 20
562 x 550 x 450 20
562 x 550 x 460 20
Gap
between
cupboard
& ceiling
50
50
Not
applicable