Field Connectors - Honeywell FS20X Series User Manual

FS20X Fire and Flame Detectors
4. Slide the module out of the enclosure base
Figure 14. Removing the electronics module

Field Connectors

There are two field connection options:
1. A removable ten-pin screw terminal connector (J2) for hardwired relay
applications.
2. A removable six-pin screw terminal connector (J1) for analog output or RS-485
digital communication applications.
The removable connectors provide quicker installation and allow the detector's
enclosure to be installed before the electronics module.
22
(Figure 14).