Table of Contents
Advertisement
1.800.561.8187
6.12 Alarm Notification
Select 'Alarm Notification' under 'CONFIGURATION' menu to set the email recipients that will
receive the emails for alarms.
To enable the alarm notification, select 'Enabled'. With the alarm notification enabled users
will be notified via email when an alarm is over/under the alarm condition. The AcuLink 810
supports a maximum of 3 recipients, once email address for each recipient is entered and
click on 'Save'. Once an recipient has been added, users can click on 'Test Email' button to
check if a test email is received.
6.13 Post Channels
The AcuLink 810 supports 3 HTTP/FTP channels.
To configure the HTTP/FTP data forward from the web interface click on 'Post Channel' un-
der the 'CONFIGURATION' menu on the left panel of the interface.
To configure the post channels select the corresponding post channel tab.
6.13.1 HTTP Post Method
The HTTP post method allows the user to post meter data to an HTTP/HTTPS server.
Post Channel Enable: Select Enabled to enable the post channel data forward
Post Method: Choose from either HTTP/HTTPS in the drop down menu
Post Name Fixed: Select Yes or No to enable a fixed post name, if yes selected enter in
the post name.
www.
Chapter 6: AcuLink 810 User interface
V: 1.0 Revised: May. 2019
information@itm.com
.com
43
Advertisement
Table of Contents
