Table of Contents
Advertisement
1.800.561.8187
Chapter 6: AcuLink 810 User interface
6.2 Adding Devices to the AcuLink 810
On the left navigation panel of the AcuLink 810 web interface, there is a menu titled 'DE-
VICE'. In the devices menu there are two options:
1. Modbus Device
2. Digital Input
This is where users can add a Modbus device or configure the digital input on the AcuLink
810 gateway. The user can add devices to the gateway by Modbus RTU, and by Modbus TCP.
Modbus TCP
Acuvim II Series Meter
20
V: 1.0 Revised: May. 2019
www.
Netwiork Switch
Ethernet Cable
D A T A A C Q U S I T I O N S E R V E R
information@itm.com
.com
Ethernet Cable
Advertisement
Table of Contents
