Table of Contents
Advertisement
1.800.561.8187
7. LED Description
There are a total of 13 LEDs on the AcuLink 810 data acquisition server and each represent
different functions pertaining to the unit.
With the exception of the blue power LED, the remaining LEDs can be divided into three
groups:
7.1 AcuMesh LEDs
The AcuMesh has a total of six LEDs which are related to the AcuMesh status.
•
RSSI - There are three RSSI LEDs which indicate the signal strength of the incoming sig-
nal.
•
ASSOC - Indicates that the transceiver is powered on or it is communicating. The Red
LED is 'ON' when powered, and briefly 'ON' or flashing during RF transmission.
•
RX - Indicates that the transceiver is receiving data.
•
TX - Indicates that the transceiver is transmitting data.
www.
Chapter 7: LED Description
D A T A A C Q U S I T I O N S E R V E R
V: 1.0 Revised: May. 2019
information@itm.com
.com
61
Advertisement
Table of Contents
