Table of Contents
Advertisement
1.800.561.8187
Chapter 6: AcuLink 810 User interface
The following settings will need to configured:
•
Label: Description of the alarm.
•
Parameter: In the drop down menu select the parameter to be monitored.
•
Min: Select the minimum value to trigger the alarm parameter.
•
Max: Select the maximum value to trigger the alarm parameter.
Click on 'Save' once all settings are entered in correctly.
For example if the parameter selected was 'Frequency' with a minimum threshold of 0
and a maximum threshold of 50, the alarm will be triggered when the frequency is less
than or equal to 0 Hz and when the frequency is greater or equal to 50 Hz. Any value
outside of the range set will trigger the alarm.
6.5.2 How to view alarm
The Alarm column in the Modbus Device List will show users the number of alarms
that have been triggered.
32
V: 1.0 Revised: May. 2019
www.
information@itm.com
.com
Advertisement
Table of Contents
