Table of Contents
Advertisement
1.800.561.8187
Chapter 6: AcuLink 810 User interface
• Time Zone: Users can select the timezone where the gateway is installed.
6.10 Network Settings
The AcuLink 810 supports both Ethernet and WIFI communication. There are two Ethernet
ports that can be used. The network settings can be found under the 'CONFIGURATIONS'
menu on the left panel of the gateways web interface.
The DNS settings for the AcuLink are displayed. By default the DNS settings are:
•
DNS 1: 8.8.8.8
•
DNS 2: 8.8.4.4
6.10.1 WIFI
Users can configure the WIFI settings by selecting the 'WIFI' tab on the Network Configura-
tions page.
Wi-Fi Enabled: Users can enable or disable the WIFI on the AcuLink 810
Wi-Fi Mode: There are two WiFi Modes:
1. Access Point Mode: Where the AcuLink 810 acts as a wireless bridge allowing other
wireless devices to connect to it.
38
V: 1.0 Revised: May. 2019
www.
information@itm.com
.com
Advertisement
Table of Contents
