Advertisement
Initial Washing:
After installation it is recommended to perform the initial washing of the system. For this:
15-30 min
Note: To ensure best filtration you may need to adjust the opening of the inlet valve so that fil-
tered water flow from the fully opened faucet would not exceed 34-68 fl oz/min. (1-2 l/min.).
8
open cold water supply valve
■
open the inlet valve
■
open the filtered water faucet
■
wait for water to arrive at the faucet (it may take a wile, especially
■
first time, water foam and air may be going out of the system); wait for
15-30 minutes for more or less steady flow from the faucet.
shut off the faucet
■
your system is ready for use.
■
Advertisement
