Advertisement
Installation Steps:
1.
Install adapter ball valve (included) to
the cold water supply.
Use some Teflon or plumbers sealing tape to
prevent leaks. Use three included threaded
adapters to make different connection con-
figurations (see chart for details).
2.
Create ½" hole for the filtered water faucet and install it.
Tip: If you have a soap dispenser or a water
sprayer in an existing hole you may remove it
and use its hole for the filtered water faucet.
3.
Remove gags and connect tubes as follows. See the General Connection Chart for details.
Insert water supply tubing from inlet valve adapter into the "inlet"
■
fitting of the filtration unit.
Insert filtered water tubing from the "faucet" outlet fitting of the fil-
■
tration unit into the faucet using insert, sleeve and compression nut.
See faucet installation chart for details.
G1/2"
UNEF 9/16"-24
Adapter
1
Adapter
3
G3/8"
1
4
5
7
9
11
1. Faucet
2. Chrome washer
3. Black rubber washer
4. Countertop or
sink deck
5. Black washer
G3/8"
Adapter
2
UNEF 9/16"-24
G1/2"
Adapter
1
G1/2"
UNEF 9/16"-24
2
3
6
8
10
6. Lock washer
7. Lock nut
8. Insert
9. Sleeve
10. Compression nut
11. Tubing
7
Advertisement
