Statement Of Compliance; Australian Emc Regulations; Noise Declaration (German) - HP 37718A Installation And Verification Manual

General Information

Statement of Compliance

Statement of Compliance
This instrument has been designed and tested in accordance with IEC
Publication 1010-1 + A1:1992 Safety requirements for Electrical
Equipment for Measurement, Control and Laboratory Use, and has been
supplied in a safe condition. The instruction documentation contains
information and warnings which must be followed by the user to ensure
safe operation and to maintain the instrument in a safe condition.
The CE mark shows that the product complies with all
relevant European legal Directives.
This is a symbol of an Industrial Scientific and Medical
ISM 1-A
Group 1 Class A product.
The CSA mark is a registered trademark of the Cana-
dian Standards Association.

Australian EMC Regulations

The C-Tick mark is a registered trademark of the
Spectrum Management Agency of Australia. This
signifies compliance with the Australian EMC
Framework Regulations under the terms of the
Radiocommunications Act of 1992.

Noise Declaration (German)

LpA<70dB
am Arbeitsplatz (operator position)
normaler Betrieb (normal position)
nach DIN 45635 pt.19 (per ISO 7779)
1-10