Cleaning; Check Hydraulic Oil Level; Permitted Hydraulic Oils - Blitz DUPLEX S2 Operating Instructions Manual

8. Maintenance

8.4 Cleaning


Clean lift regularly.

Clean lift only in unloaded condition.

Do not use aggressive cleaning agents for lift
components and covers.

Only use lint-free cleaning cloths.

Do not use compressed air or high-pressure
cleaners.

Always call in the appointed maintenance repre-
sentative if hazards are detected.

At the start of cleaning, make sure you clean
connections and screw joints of oil, lubricants
and cleaning agents.

8.5 Check hydraulic oil level

i
Check oil levels on all lifting cylinders.
1. Lower all lifting cylinders completely.
2. Remove dipsticks and check hydraulic oil level.
3. Refill hydraulic oil ( chapter 8.6) up to filling
level, if necessary.
4. Replace dipstick.
5. Calibrate the sensor setting after every interven-
tion in the hydraulic system ( chapter 8.13).
20

8.6 Permitted hydraulic oils

i
Important notes

Only use hydraulic oil according to DIN 51524 for
the hydraulic system.

Contact us when using hydraulic oil of other
manufacturers.

Oil and lubricants are hazardous to water. Always
dispose of these substances in an environmental-
ly friendly manner according to the regulations in
your country ( chapter 15, Disposal).
Damage to seals with use of incor-
ATTENTION
rect hydraulic oil.
 Do not use oil based on rapeseed oil.
 The water content in the oil is not to exceed
2%.
 Do not mix different types of oil.
Manufacturer Oil type
ARAL Vitamin
BP Energol HLP 22, HLP-D 22
ESSO ESSTIC 22, Nuto H22
FINA Hydran 22, Circan 22
FUCHS Renolin MR, Renolin B
MOBIL OIL Mobil D.T.E
SHELL Hydrol DO 22
TEXACO Rando Oil 22, -HDC-22
VALVOLINE ETC
VEDOL Andarin 22
117127 ● 07/2011