Operation; Emergency Stop; Switch On Equipment; Lift Allocation (Optional) - Blitz DUPLEX S2 Operating Instructions Manual

5. Operation

5. Operation
Danger of personal injury with
malfunctions.
DANGER
 Immediately switch off and secure the lift, in-
form a superior in case of signs of malfunc-
tions, such as unusual noise, leakage or dis-
played malfunction reports.

5.1 Emergency stop

Press the Emergency stop button to immedi-
i
ately stop the lift in case of emergency.
Emergency stop is triggered by the

Main switch or

Emergency stop button on control panel

5.2 Switch on equipment

13
1. Switch on power supply with Main switch (1)
(position "1").
2.
Switch on controls with button (2).

5.3 Lift allocation (optional)

Lifts with 4, 5 or 6 lifting cylinders can be allocated
to individual workplaces. a control panel is provided
for each workplace.
12
14
1.
Allocate lift with selector switch according to
Illustration 14. The allocated control panels are
activated.
Different allocation can only be selected with
i
all lifting cylinders unloaded.

5.4 Detect vehicle data

1.
Determine weight specifications in vehicle regis-
tration.
2.
Compare specifications with lift nominal values.
3.
Determine permissible pick-up points according
to manufacturer's specifications.
4.
Contact a superior in case of missing vehicle
specifications.
Vehicle center of gravity must be in center of
i
vehicle; inspect load and bodywork.
117127 ● 07/2011