Volkswagen Touareg 2003 Service Manual page 159

– Enter displayed values on EET data sheet in column „Test
values for exhaust emissions test" on display as follows:
1 - Test speed (idling speed)
2 - Warm-up phase for catalytic converter
3 - Engine temperature
4 - Increased idling speed
5 - CO content at increased idling speed
6 - Lambda at increased idling speed
7 - Idling speed
8 - Select regulating probe type, either »step-type probe«, or
»broad-band probe« -item 1-.
9 - Lambda probe value
– When all data have been entered properly, press »Continue«
button -arrow-.
Specified data input for EET as bar code:
– If specified data for EET are available as bar code, read bar
code of EET data sheet with bar code reader.
All data required are shown on display.
– Press button -arrow- to continue the process.
►
Visual check:
– Follow instructions on display.
– Perform visual check.
– If visual check is OK press „OK" button. -arrow-
Note
When "not OK" button is pressed a check will be carried out
The visual check is displayed with the request to connect the di‐
agnostic connector -arrow A- and to check the MI lamp
-arrow B-.
Touareg 2003 ➤
Maintenance - Edition 11.2011
5. Exhaust emissions test
155