Volkswagen Touareg 2003 Service Manual page 135

Version 1
On this wiper arm the blade protector is secured on the blade with
two securing clips -arrows-.
Perform the following procedure:
– Set wipers in service position. This can be done by switching
the ignition on and off once with bonnet closed. Then operate
wiper lever and the wipers will stop in service position.
– Take the right-hand wiper from windscreen and lift.
Caution
To prevent damage, ensure that the wiper is only touched at
the wiper joint and do not pull on the wiper blade.
– Now remove upper securing clip upwards and lower securing
clip downwards -arrows-.
– Pull blade protector off wiper blade from bottom to top.
– Carefully place wiper arm back onto windscreen.
Perform the same procedure for the left-hand wiper.
– Switch ignition on and briefly operate the wiper lever to move
the wipers back to park position. Switch ignition off again.
Version 2
Touareg 2003 ➤
Maintenance - Edition 11.2011
4. Descriptions of work
131