Before Initial Use - Clas Ohlson ES-2339A-02 Instruction Manual

Operating instructions
Before initial use
Note: Remove the protective plastic film from the soleplate before use.
Harmless smoke and odour may be emitted from the iron the first few times is used.
This is a temporary condition and is completely normal. Before using the iron, test it
on a spare piece of cotton cloth to check that both the soleplate and the water tank
are clean.
Refilling
1. Unplug the iron and let the soleplate cool down. Stand the iron upright.
2. Turn the steam control knob (3) to the 0 position.
3. Flip open the water tank's refill port (2).
4. Use the measuring cup and fill the tank (9) up to the max mark.
5. Close the lid.
Note: The water tank's filter prevents limescale deposits from forming in the iron.
The filter is permanently attached and does not need changing or cleaning. Use only
tap water. The filter will malfunction if distilled or demineralised water is used. Chemical
additives, fragrances or descaling agents added to the water will also destroy the filter.
Temperature setting knob
1. Always check the fabric care label on the piece to be ironed.
2. Always use the lowest recommended temperature setting if the fabric consists of
mixed materials.
3. Plug in the iron and stand it upright.
4. Use the temperature control knob (7) to set the desired temperature
MIN – ○ – ○○ – ○○○ – MAX.
- The temperature light (6) will be lit until the set temperature has been reached.
- The temperature light (6) will turn off once the set temperature has been reached.
The garment's care label usually has the recommended ironing setting on it:
Symbol Material
Synthetic
Silk/wool
Cotton/linen
Material not suitable for ironing.
Thermostat setting
○ Low temperature
○○ Medium temperature
○○○ High temperature
6