Toshiba SG-1600 Owner's Manual page 40

QUICK
CALLER ID CORDLESS TELEPHONE
REFERENCE
SG-1600
GUIDE
SG-1800
Read the Owner's Manual for details.
SETTING UP THE BASE UNIT
Set the TONE/PULSE switch for the type of dialing service you have.
Fasten the AC
adaptor cord.
Raise the
antenna to
vertical position.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Code
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
CHARGING THE BATTERY PACK
1
Black Red Remove the battery compartment cover by sliding it
down.
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Insert the battery pack . Then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
IN USE/
CHARGE
LED
Charging contacts
UCZZ69701BA RC009261 Printed in China
SETTING THE AREA CODE
1
Press FUNCTION , then press
2
Press and enter a 3-digit area
SELECT
code.
3
Press SELECT , then press FUNCTION
3
SELECT
FUNCTION
MAKING A CALL ANSWERING A CALL
1 1
Key-in the phone When a call is
number (max. 32 received,
digits). "Incoming call"
2 appears on the
Press .
TALK
LCD.
3
To hang up, press
2
Press
TALK or place
connect.
TALK TALK
the handset on
3
the base unit. To hang up, press
TALK
Dialpad
the handset on the
base unit.
CALLER ID SERVICE
Making a call with Caller ID data
.
3
1
Press CID
the number you wish to dial.
.
1/7
SMITH JOHN
456-7890
TALK
,
2
CID Press TALK
The displayed number will be dialed.
TALK
4567890
Note:
For long distance calls, you need a prefix "1" and the area
code. Press
area code before press
Storing Caller ID data to Speed dial memory
1
Press CID
up the number you wish to store into Speed
dial memory.
2
Press MEM
MEM
the LCD.
TALK to
,
3
Press
CID
number on the dialpad.
or place 4
SELECT Press SELECT
sounds and the Caller ID data is stored.
Press CID
To use this feature, you must subscribe to the Caller ID service provided by your telephone company.
Deleting Caller ID data
, then press or to display
9:30AM 12
,
CID
.
SELECT
DELETE
L.D./1 LOCAL/3
and to add "1" and the
TALK
.
Caller ID on Call Waiting
To use this feature, you must subscribe to the Caller ID on Call Waiting service provided by
, then press or to bring your telephone company.
. "Select Location" appears on
, or enter a memory location
FLASH
. A confirmation beep
to return to standby mode.
For more detailed instructions and examples, please refer to the owner's manual.
1
Press CID , then press or to display the
Caller ID number you wish to delete from the memory.
2
Press DELETE .
Press or to select Yes or No.
Delete Message?
sYes
No
3
Press SELECT or DELETE . If you select Yes, a
confirmation beep is emitted and the LCD displays
the next Caller ID data. If there is no more Caller ID
data, the LCD displays the message "END".
If you select No, the LCD returns to the Caller ID data
screen.
4
Press CID to return to standby mode.
1
Before answering a call, check to see that the
caller's name and telephone number are displayed
on the screen. To switch to the waiting call, press
FLASH
.
The first caller is put on hold.
2
To switch back to the first caller, press FLASH
again.