Faber SOTTILE SLIM Series User Manual page 5

SHOWER SET ACCESSORIES IDENTIFICATION
2. RAIN SHOWER SET
Water Saver
Chip
Water Saver
Chip
STEP 1
There is two Water Saver Chips located
under the hand shower and on top of the
rain shower head.
Water Saver Chip
A chip that helps you save water up to 50%!
ALERT
You may remove the two water saver chips if
prefer stronger water pressure. Please be
reminded that this is up to personal
preference.
STEP 2
Do marking for the location of the lower square and upper
round bracket. Install the bracket holders on the wall.
Assemble the upper tube with rain shower and lower tube
with divider.
Slide down and hook the assembled diverter to the
mounted square bracket.
Tighten the screws and make sure all joints are completely
connected to avoid leakage.
Rain Shower Head
Wall Bracket
Hand Shower
Shower Holder
Silding Rail
Soap Dish
Diverter
360 Degrees 3-in-1 Rotation Diverter
270˚
5
2
Tighten the
bottom screws
1
Slide down
and hook
the
assembled
diverter to
the
mounted
square
bracket
360˚
90˚
180˚