Table of Contents
Advertisement
Pocket Digital Multimeter
CONTENTS
1. Safety information
1.1 Preliminary
5.1 Battery replacement
5.2 Test leads replacement
Pocket Digital Multimeter
1. Safety information
1
1
To ensure safe operation, and in order to exploit to
2
the full functionality of the meter, please follow
3
the directions in this section carefully.
3
4
This multimeter has been designed according to IEC-
4
1010 concerning electronic measuring instruments
5
with an overvoltage CAT II 600V and pollution 2.
5
Follow all safety and operating instructions to ensure
5
that the meter is used safely and is kept in good
6
operating condition.
10
1.1 Preliminary
10
1.1.1 When using the meter, the user must observe all
10
normal safety rules concerning:
10
• Protection against the dangers of electrical current
10
• Protection of the meter against misuse
11
1.1.2 When the meter is delivered, check if it has been
11
damaged in transit.
11
12
1.1.3 When poor condition under harsh preservation or
shipping conditions caused, inspect and confirm
12
this meter without delay.
13
1.1.4 Test leads must be in good condition. Before using
13
verify that the insulation on test leads is not
13
damaged and/or the leads wire is not exposed.
14
1.1.5 Full compliance with safety standards can be
14
guaranteed only if used with test leads supplied.
14
If necessary, they must be replaced with the same
16
model or same electric ratings.
16
16
Warning
01
- Quick Links:
- Symbols
- General Specifications
Hide quick links:
Advertisement
Table of Contents
