Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mastech MS8211
Summary of Contents for Mastech MS8211
- Page 1 MS8211 DIGITAL MULTIMETER INSTRUCTION MANUAL...
- Page 2 CONTENTS CONTENTS 1. SAFETY INFORM.......1 4.4 Range Transform........10 1.1 Preliminary..........1 4.5 Auto Power Off........10 1.2 During use..........2 4.6 Preparation For Measurement.....11 1.3 Symbols..........3 4.7 Measuring DC Voltage......11 1.4 Maintenance...........4 4.8 Measuring AC Voltage......13 4.9 Measuring Resistance......14 2. DESCRIPTION........4 4.10 Diode Testing........15 2.1 Names OF Components......5 2.2 Components Elucidation ......6 4.11 Continuity Testing......16...
-
Page 5: Specifications
- Non-contact detecting is convenient to test the socket 2.2 Components Elucidation or the lead whether is with power or not. - RANGE Button - This meter has function of auto range and manual range. This button is used to transform Auto range or manual - This meter has function of auto power off. - Page 8 4.6 Preparation For Measurement NOTE: 4.6.1 Set the transform switch to the right range. At the - At the little voltage range, the meter will show unsteady reading when test leads haven't reach the circuit, it’s manual range, when the value scale to be measured is unknown beforehand, select the highest range.
- Page 10 NOTE: WARNING - The meter will show the approximate forward voltage Risk of Electrocution. drop of the diode. When measuring in-circuit resistance, be sure - If the meter and the lead connection is reversed, only the circuit under test has all power removed figure ‘OL’...
- Page 11 4.12.1 Rotate the probe socket anti-clockwise to spin the 4.11.5 Connect the probe tip of the meter to one side of probe into the meter. the tested circuit and probe tip of the test lead 4.12.2 Set the transform switch at the V range position.
Need help?
Do you have a question about the MS8211 and is the answer not in the manual?
Questions and answers