Sony Vision Exchange PEQ-C100 System Integration & Services Manual page 114

When Pod cannot connect with the main unit
Start
troubleshooting
Are LED indicators of LAN connector of
main unit, Pods, and network switch
Lit
lit?
Not lit
Disconnect/connect or replace LAN cable.
Replace/reconfigure network switch
Does not improve
Are the IP addresses displayed in the
information area of the main unit and
Pods correct?
Correct
Not displayed or incorrect
Enable configured static IP address and check there
are no overlapping addresses, or reissue IP
addresses as required.
Does not improve
Replace Pod and main unit with PCs,
connect to network, and check PCs can talk
to each other.
Can talk Cannot talk
Contact service
Check with network device vendor.
representative.
114