- EN - - EN - Table of Contents Information about these operating instructions ................. 18 Symbols used in these instructions ..................18 Product Description ........................... 19 Unit configuration ........................19 Function description ........................20 ...
Translation of the original Operating Instructions Information about these operating instructions Welcome to OASE Living Water. You made a good choice with the purchase of this product PondoVac Premium. Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
- EN - Product Description Unit configuration Description Handle Chassis Vacuum head 2 × locking clips Fix the vacuum head on the adapter ring − Adapter ring Discharge hose connection C pressure hose − 2" IG aluminium Storz coupling type C with seal −...
The robust chassis with solid rubber wheels and parking brake ensures excellent mobility and stability. ► Intended use PondoVac Premium, referred to in the following as "unit", may only be used as specified in the following: For pond sludge removal. ►...
- EN - Correct electrical installation Electrical installations must meet the national regulations and may only be carried out by a qualified ► electrician. A person is regarded as a qualified electrician, if, due to his/her vocational education, knowledge and ►...
Ensure that the cables are not bundled together or coiled up. − Connect the discharge hose and floating suction hose as well as the Oase nozzles. ► Recommendation: Use a bend-resistant discharge hose for the first 10 metres. A bend-resistant −...
- EN - Operation Operating panel PondoVac Premium Pump PVC0013 Switching on/off off: Unit is switched off on: Unit is switched on The vacuum starts up. − The discharge pump switches on when the max. water level is reached. (1) −...
- EN - Suction mode Attention! Dangerous electrical voltage! Possible consequences: Death or severe injury. Protective measures: Prior to starting up the unit, switch off the mains voltage of all units located in the water. Note! The electronics will be destroyed . Never operate the unit without the filter element! Plunge the extension wand with floating suction hose and nozzle into the water and vacuum the floor ►...
- EN - Remedy of faults Malfunction Cause Remedy The unit does not switch on No mains voltage Switch on mains voltage The vacuum does not start up The carbon brushes are worn Have the carbon brushes replaced (→ Replacing the carbon brushes) The suction power is reduced The telescopic wand with vacuum attachment Adhere to max.
- EN - Maintenance and cleaning Attention! Dangerous electrical voltage. Possible consequences: Death or severe injury. Protective measures: Isolate the unit prior to reaching into the water and carrying out any work on the unit. Secure the unit from being switched on inadvertantly. The following conditions must be met: The plug connectors of the helix cables are connected on delivery.
The following components are wear parts and are excluded from the warranty: Carbon brushes ► If the carbon brushes become worn, please send the unit head to OASE for repair. − Disposal Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided. Disable the unit...
- EN - Technical data PondoVac Premium Rated voltage V AC Mains frequency Power consumption, discharge pump Power consumption, vacuum 1500 Max. power consumption 2300 Safety fuse 5 × 20 mm, 250 V Length of power cable 7.50 Permissible water temperature °C...
Need help?
Do you have a question about the PondoVac Premium and is the answer not in the manual?
Questions and answers