Connect Your Action Computer To Your; Mac Or Pc - Seac ACTION Manual

Connect your ACTION computer to your Mac or PC
The Action can be connected to your Mac or PC through the DiveLogger
program to download dives and run updates.
Updating your Action Dive Computer.
It's very important to keep your Action Dive Computer consistently up to date
with the most recent version of the software.
The Action must be connected to a Mac or PC using the USB cable to run the
updates.
• WARNING!
If an update is available, a new version of the operating system will be
installed.
After every update:
LAYOUT MENU: PC
- Check that the Action settings (mix, algorithm, deco stops, etc.) are correct
for the next dive.
- After each update, the Action resets the settings and tissues (see RESET in
this manual).
After connecting your Action to your Mac or PC using the
special USB cable and having set the Action to computer
La porta seriale è attivata e configurata correttamente.
In attesa di comunicazione.
mode, when "PC LINK ON" appears you can start the
data transfer.
ACTION
41