Advertisement
Thank You for choosing Distributel
In order to ensure the smooth setup of your Distributel High Speed Cable
Internet service, please follow the easy steps laid out in this guide.
The setup kit for your High Speed Cable service
should contain the following items:
Technicolor Modem*
and power supply
* Please note that the modem shown is for the purposes of
illustrating the setup process and may differ from your device.
Before beginning the setup process, please
ensure that all of your equipment is turned off.
STEP 1
Connect the coaxial cable emerging from your cable outlet to the CABLE
port located on the back of the modem.
Coaxial Cable
Cable Outlet
If you require a longer length of coaxial cable, this
can be purchased at most home electronic stores.
Ethernet
Cable (1)
Back of Technicolor Modem
STEP 2
Using the Ethernet cable provided, connect your laptop (or the Internet/
WAN port of your router if you would like a network setup) to the modem's
ETHERNET port 1.
Back of Modem
Ethernet
Cable
You may now turn all your devices back on.
STEP 3
Please wait for the modem to boot-up. The Technicolor modem must have
solid POWER, DS, US and ONLINE green or blue lights displayed. The LINK
light should be either solid or flashing. A flashing LINK light indicates data
transferring. If the lights do not behave as described, repeat steps 1 and 2.
TECHNICOLOR
MODEM LIGHTS
LIGHTS
READ
Power
Solid
DS
Solid
US
Solid
Online
Solid
Solid
LINK
or Flashing
Front of Technicolor Modem
CONGRATULATIONS! YOUR SETUP IS NOW COMPLETE.
Ethernet Port
Advertisement
