Installing The Receipt/Journal Roll - TEC EO1-11095 Owner's Manual

6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR
6
Install the Receipt and Journal rolls (referring to the following
section "Installing the Receipt/Journal Roll") .
6.1

INSTALLING THE RECEIPT/JOURNAL ROLL

Installing the Receipt Roll
X MGR
REG
SET
Care must be taken not to injure yourself with the paper cutter.
1
-
Turn the Mode Lock to the REG position with power ON.
Z
2
To remove the Receipt Cover, insert the Receipt Cover Key to the
Receipt Cover Lock, and then turn it 90 clockwise.
3
Cut the paper end to make it sharp.
6.1 INSTALLING THE RECEIPT/JOURNAL ROLL
WARNING!
6-2
EO1-11095