Woodbridge BTS1606-B0030 Installation Instructions

WOODBRIDGE
READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT
INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING
OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
We reserves the right to change, update, modify, alter, redesign this manual/product or its policies without prior notice!
We
shall not be liable for any injuries or property damages in connection with this product during installation or use of this product!
This products must be installed by a fully insured and licensed plumber only. Installation of any our product by anyone other
than fully insured and licensed plumber shall void limited warranty. We recommends that such licensed plumber have experience
in the installation of products.
Limited warranty is void on any commercial installation
We are not responsible for local code compliance for this product. Building and plumbing codes may vary from state-to-state in
accordance to your location. We are not responsible for providing any compliance certifications.
Under no circumstances we are shall not be liable for any and all incidental damages sustained in connection with this product
Neither manufacture, nor distributor, nor retailer is responsible for water damage or flood caused due to use of this product.
Under no circumstances We shall not be liable for any and all fees, cost of installation/reinstallation/removal, subsequent
damage or transportation in case of the product defect

BEFORE YOU BEGIN

Please read these instructions carefully to familiarize yourself with the required
tools, materials, and installation sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
All information is based on the latest product information available at the time of
publication. Woodbridge®
characteristics, packaging, or availability at any time without notice.
please leave these instructions for the consumer.

PRODUCT REQUIREMENTS

A. Summary Of Key Requirements
Observe all local plumbing codes.
Install the unit to a level subfloor.
Provide properly-dimensioned framing.
Baths are designed for a variety of installations,depending upon the model chosen.
B. Product Inspection
Uncrate and inspect bath for damage. Leave all materials in the crate during construction to
prevent damage.
R
2 PEOPLE ARE REQUIRED TO LIFT AND DURING
ENTIRE INSTALLATION OF THIS PRODUCT
INSTALLATION OF THIS PRODUCTS BY AN
INEXPERIENCED INSTALLER MAY RESULT
PERSONAL INJURY OR DEATH!
reserves the right to make changes in product
INSTALLATION INSTRUCTIONS
BTS1606-B0030
1