Daily Operation Flow - TEC EO1-11099 Owner's Manual

1.

DAILY OPERATION FLOW

In a Master-Satellite System, a certain order of jobs on the Master and Satellite terminals are pro-
vided. If the necessary jobs are not proceeded in the correct order, sale entries may not be oper-
ated or report collections may not be possible. The following chart shows the basic daily operation
flow on the Master and Satellite terminals.
MASTER TERMINAL
Turn ON the power of every ECR in the in-line system.
First turn ON the power of the Master terminal, and then the power of each
Satellite terminals.
Operate TERMINAL OPEN CHECK
to check all the terminals are correctly
connected (Chapter 2):
Mode Lock: X/RTR Declaration:ON
80 [AT/TL]
Operate DATE AND TIME DLL to synchro-
nize the date and time of Satellite terminals
to that of the Master terminal (Chapter 5).
Mode Lock: SET /RTR Declaration:ON
505 [AT/TL]
STORE OPEN
Sign ON, Sale Entries, Sign OFF
Refer to the OPERATOR'S GUIDE for the Standalone level.
Read (X) Report Takings on Individual Terminals
Refer to Section 3.2 in this manual and MANAGER'S GUIDE for the Standalone
level.
In-line Read Report Takings on
Master Terminal.
Refer to Section 3.2. in this manual.
to be continued on the next page.
(
– 1 –
SATELLITE TERMINALS
)
EO1-11113