TEC EO1-11099 Owner's Manual page 17

There are the following two ways of receipt paper feed procedure.
6
A: Manual installation
B: Installation using the [RF] key
A: Manual installation
B: Installation using the [RF] key
5
Place the paper roll in the outer side holder of
the two roll holders.
Lift the green lever on the receipt side.
- 11 -
Insert paper from the rear of the printer
until the leading edge of paper comes out
by 10 cm.
Lower the green lever.
Attach the receipt cover.
Insert paper from the rear of the printer
until it won't go no further.
Press the [RF] key to feed paper until the
leading edge of paper comes out by 10
cm.
Attach the receipt cover.
EO1-11113