Download Print this page

Assigning An Ip Address - Motorola avigilon 30L-H4PRO-B Installation Manual

High definition professional ip camera
Hide thumbs

Advertisement

Important: You must create a user with administrator privileges before the camera is operational.
The first user can be created using any of the following methods:
Camera's Web Interface: enter the camera's IP address in a web browser to access the web
l
interface. If the camera is in the factory default state you will be redirected to the Add a new user
page to create the first user. For more information, see the Avigilon High Definition H4 and H5 IP
Camera Web Interface User Guide.
Camera Configuration Tool version 1.4.4 or later: cameras discovered in the factory default state will
l
be identified by
the Avigilon Camera Configuration Tool User Guide.
USB Wi-Fi Adapter: when connecting a camera in the factory default state, you will be redirected to
l
the Create Administrator User page to create the first user. For more information, see Avigilon USB
Wi-Fi Adapter System User Guide.
Avigilon Control Center software version 7.4 or later, or version 6.14.12 or later: when connecting a
l
camera in the factory default state, the client software will ask you to create a new user. For more
information, see the Avigilon Control Center Client User Guide.
Avigilon Blue service v3.0 or later: when adding a camera you will be asked to create a new user for
l
cameras in the factory default state. For more information, see the Avigilon Blue Subscriber or Dealer
User Guides.
Tip: If you are connecting your Avigilon camera to a 3rd party VMS, you will need to set up the first
user through the camera's Web Interface, Camera Configuration Tool, or USB Wifi Adapter before
you connect to the 3rd party VMS.

Assigning an IP Address

The camera automatically obtains an IP address when it is connected to a network.
Note: If the camera cannot obtain an IP address from a DHCP server, it will use Zero Configuration
Networking (Zeroconf) to choose an IP address. When set using Zeroconf, the IP address is in the
169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following methods:
Camera's web browser interface: http://<camera IP address>/
l
Network video management software application (for example, Avigilon Control Center (ACC)™
l
software).
ARP/Ping method. For more information, see
l
page 15.
Assigning an IP Address
. Select the Admin Users tab to create the first user. For more information, see
Setting the IP Address Using the ARP/Ping Method on
7

Advertisement

loading

  Related Manuals for Motorola avigilon 30L-H4PRO-B