Download  Print this page

HP EliteOne 1000 G1 Hardware Reference Manual page 27

All-in-one business pcs
Hide thumbs

Advertisement

5.
Pull the release lever at the front of the drive outward (1). Then slide the drive back until it stops and lift
it out of the drive bay (2). And then disconnect the cable from the rear of the hard drive (3).
6.
Remove the four mounting screws from the sides of the hard drive that was removed.
7.
Install the four mounting screws that were removed from the old drive in the sides of the new hard drive.
Replacing the hard drive
21

Advertisement

loading

  Related Manuals for HP EliteOne 1000 G1

This manual is also suitable for:

Eliteone 1000 g2